Septic tanks maintenance how to

While a septic system works, sludge will keep on forming on the bottom of the tank. A usual septic tank is designed in a way that can permit the functioning over three years without needing to eliminate any residue from the bottom.

If the sludge reaches a higher level, then the sewage may start to eliminate more solids in the drain.

In the end if sludge starts to accumulate into the drain the system will fail and the absorption area will get clogged. This means that you have to periodically check the septic tank and pumping system.

Another activity that you have to perform in order to assure a correct functioning of the system is to periodically check the ground near the septic tank for any depressions or low areas. This can prove dangerous because the system may collapse. The best sign that show that there is pressure in the system are when waste matter gets at the ground level.

If the septic system collapses then the results can be fatal.

Someone who can help with this problem is the pumping contractor. The sludge that accumulates on the bottom of the tank can be eliminated by breaking the scum layer and mixing it with the sewage liquid that stays in the tank. Usually the technique for this is to stop the process and re inject a part of the eliminated scum back inside the septic tank.

In order to be able to perform a better inspection of the system you have to wash the interior and bottom with a hose. Once they are cleaned you can search for leaks that if found need to be fixed instantly.

It is very important to take care of your septic system, and regular maintenance can assure that it will run in the future years also. Always wear a protective mask when you open the septic tank and remember to pump the tank every 3 to 5 years.

care, clogged septic system, damaged septic system, draining, maintenance, protect septic systems, pumping system check, regulations for septic systems, septic system maintenance, septic systems, septic tank, sludge