Instructions for preparing the installation of gutters

The role of the guttering system is to divert the water safely away from your roof, walls and house foundation. A very important thing if you want your system to run efficiently is the process of installation.

First, you will have to make notes and drawing for the existing system.

Note the place of the gutters and downspouts and also, the place and number of brackets. Then you will have to climb on a ladder and measure the fascia of the house and the linear lengths where the gutters will be placed. Remember about the joints which should be at least 2 inches and make precise measurements for the downspouts.

You will need to pay attention when you will measure the distance between shingles and gutters if you want to avoid overflow and flooding. Make sure that you measure the distances in that way water will be collected by the gutters and not flow over the top. You will have to mark using a chalk line the place of gutters and downspouts and remember that you will need to create a slope of about ½ inch to every 16 feet of gutter.

Then, you will have to cut the pieces of gutter and join them together by 2 inch at least. Remember that they come in 10 feet lengths and count the number of brackets you will need to use. You will need to install two brackets at each end of the gutter and then to every 16 inches away. You can nail or screw them into the trim board.

Make a final check to see if the new pieces are lined up well with the existing marks and now you can start the process of installation.

aluminum gutter, bury the downspout, clogged gutter, copper gutter, durable gutter guard, foam gutter guards, gutter guard, gutter guard advantages, gutter guard cost, gutter guard filter, gutter guard material, gutter helmets, half round gutters, install gutters, leaf guard, Mastershield gutter guard, mesh gutter guard, Rain gutter, screen gutter guard, steel gutter, vinyl gutter, waterfall gutter guard